I've "heard" that you should run a wastegate spring that is rated at least 1/2 of what boost you plan on running.
For example, if you run 24psi then you should use a spring thats rated to be at least 12psi. 28 = 14 min. and so on.
If this is correct, what would happen if I run a spring that's rated to low for the boost I'm running?
Or is this entire concept BS?
For example, if you run 24psi then you should use a spring thats rated to be at least 12psi. 28 = 14 min. and so on.
If this is correct, what would happen if I run a spring that's rated to low for the boost I'm running?
Or is this entire concept BS?