My parents' car is leaking badly at the passenger side front window. The piece of weather stripping that goes around the t-bar is really off. I can't explain too well without using pictures, which I'll try to post later. The strip on the driver's side lines up nicely and the driver's side window barely leaks. The passenger side strip, however, seems like it is totally out of proportion. If you pull it one way it will line up properly in one spot, but it will go out of position somewhere else. When I post the pictures this should be a lot clearer.
For now I think it may help me fix the passenger's side if I could just tilt the rear corner of the passenger door glass in a bit, towards the inside of the car. It just needs to go a few degrees inward. My question is, is it possible to do this? And if so, how easy is it to do? I know where the height stops for the glass are and know how to adjust them, but this doesn't do too much to change the tilt at the rear corner.
Wow... this is really difficult to explain.
For now I think it may help me fix the passenger's side if I could just tilt the rear corner of the passenger door glass in a bit, towards the inside of the car. It just needs to go a few degrees inward. My question is, is it possible to do this? And if so, how easy is it to do? I know where the height stops for the glass are and know how to adjust them, but this doesn't do too much to change the tilt at the rear corner.
Wow... this is really difficult to explain.