what can i expect?

[JayGord]

Rebuild block with forged pistons, .030 bore, arp headbolts, arp rodbolts, melling cam .

walbro 340 fuel pump w/ hotwire
160 thermo w/ f body rad conversion
RJC Powerplate, biggie oil filter, boost control valve
turbotweak chip
TA 60 turbo
009 injectors
3" downpipe
Mark Jackson custom larger stock location intercooler w/ adj shroud and 3" inlet and outlets
Ported Throttle body and Plenum
MAF Translator for 3" MAF and 3" maf pipe
rear air bags w/ hrpartsnstuff spacers
accufab adjustable Fuel Pressure Reg

plan on installing Alky before taking to track so all above mods w/alky

 

[JayGord]

anybody?

 

[bison]

11.70's at 25 psi if you can nail down a 1.60 60'. This is assuming you have the tools to get the a/f and timing dialed in and there are no other problems with the car. Plan on 115 mph trap speed if the tune is there.