What size fitting/adapter for rail mount FPR?

[Snorman]

Surely Earl's or Aeromotive sells an adapter for a rail mount FPR...what is it (size, part number)?
S.

 

[RUQWKNF]

I'll assume you're talking about your Buick right?
If so, then are you needing a fitting for the fuel rail port to mount a fp gauge too?, or are you talking about the fitting that goes on the bottom of an adjustable regulator?
Let us know.

Patrick

 

[BoostedBug]

If you don't have a a gauge yet and was just going to keep one hooked to the fuel rail..Kirbans sells the complete kit with gauge and the fitting that you don't even have to take the stem out of the shrader valve. I just put one on my car and it is a nice clean fit.

 

[Snorman]

Oops...I meant gauge. I had FPR on the brain.
Anybody make an adapter from the rail to the gauge without spending the $$$ on the Kirban's, Caspers or other kits?
S.

 

[Crazi]

I used a 3 foot piece of braided line for my old nitrous kit. I think it is a 1/8 flare or -04AN if you decide to go the braided route. I went from braided to hardline and bent it around the end of the hood and up to the back of the gauge.