What sort of 60ft times SHOULD I have?

[NEARING]

With traction

Combo: T63,V2,Fel pro,83's, 210/210 billet roller, P&P heads, 3500 n/l converter, built 2004r, and all the other small stuff.

Best time in sig on 25-26psi closed exh on 27x10.5 hoosier QTP's

I feel 1.63, best car has been is kinda crappy

It's a heavy ass car so I am not looking for 1.4's or nothing but I feel low 1.5's should be possible.

Only susp mod I have is air bags

Like to do some cheap mods, say under $500.

Awaiting mease header installation and sent my converter off to have it upped about 500 rpm's too.

Like to get it in the 10.70's this spring

 

[azgn]

get some tires.....

QT Pros ain't slicks

my 3720 lb car 60's in the high 1.4's on MT ET Drags 28X9

oh, and box your control arms , get an ATR away bar, take off the front sway bar, drag shocks, & new springs & shocks on the rear

 

[TTA850]

I cant tell ya what to do to help,but can tell ya my car with a TE64, V2, 55's, 214/210 roller, Jim Testa chips, through a TH400 and 3.08 gears is getting low 1.5 to high 1.4's and is usually in the 1.47-1.49 range(1.47 best).

I'm probrobly lighter than you at 3,550lbs but am also saddled with 3.08 gears and I run 26x11.5x16 ET Streets on stock GTA wheels.

I'd say you have the power to see 1.4's if you can hook

HTH,
Steve