What's a "bottom feeder setup"?
- Thread starter Jeff
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
It's a 700-R4 filter with the feed on the bottom side of it, and a deeper aftermarket pan.
The 200-4R filter has its feed on the top of it.
http://www.drwtransmission.com/thm_200-4r.htm has good info on this.
The 200-4R filter has its feed on the top of it.
http://www.drwtransmission.com/thm_200-4r.htm has good info on this.
True bottom feeder
http://www.2004rperformancecenter.com/ The faster the car the more the benifit 'cuz the G-force causes the oil to roll back in the pan and uncover the stock filter inlet hole. cost $40-50
http://www.2004rperformancecenter.com/ The faster the car the more the benifit 'cuz the G-force causes the oil to roll back in the pan and uncover the stock filter inlet hole. cost $40-50
WE4
TBcom Admin /Prayers NYFD/NYPD
- Joined
- May 24, 2001
- Messages
- 4,594
"Bottom Feeder" is a totally different set-up
"Bottom Feeder" is a service marked pending, filter design we came up with. It is most benficial when used with our pan. The above link Hotogo posted will get you there. They are awesome!
Here is the sump itself..
http://www.2004rperformancecenter.com/mcartfree/product.asp?intProdID=147
"Bottom Feeder" is a service marked pending, filter design we came up with. It is most benficial when used with our pan. The above link Hotogo posted will get you there. They are awesome!
Here is the sump itself..
http://www.2004rperformancecenter.com/mcartfree/product.asp?intProdID=147
