Whats this connector for?

[blackbuick87]

OK, I learned my lesson last time I tried connecting a connector when I didnt know WTF it was.
Today I found another one disconnected. It is a three prong connector on the passenger side behind the overflow bowl. It has a white, gray, and green wire coming out of it. The other side has the same color wires. Evidently it has been disconnected for a while because there is corrosion on one of them. Any ideas what this is for?

 

[1970gsx]

It goes to the MAP sensor I think. (we have one of these don't we?) Should also have a vacuum line going to it.

 

[blackbuick87]

I dont think thats the one. This has three wires coming out of the loom, a connector, and then the other end goes back into the loom. Just a regular electrical connector, no vacuum fittings

 

[MeanBuicks]

Is your GN equipped with a non-functioning, power antenna by any chance?

 

[blackbuick87]

Yes sir, it does happen to have a non functioning power antenna. I have since removed the old radio so the power antenna wire is now hooked to my amp. If thats what it is when I get ambitious I will hook it up and see if it works. Probably doesnt, thats why its disconnected

 

[MeanBuicks]

The nylon cord inside the mast usually breaks causing the motor to run endlessly, hence the disconnected wires. There is a mast repair kit available for around $15 that'll fix it.

You'll just need to pull the fender away to gain access.

 

[spining 6]

i don't have a pwr ant.

so that's what that lead is for pwr ant. i was wondering myself

 

[Hawaiian Turbo]

Where is the mast repair kit sold?? Thanks