Which shift kit

[wahoo50]

Still experiencing flair shift problems with my 200R4 in 2-3rd shift and have decided to add a deep pan, servo and shift kit. Someone please advise whose kit and servo I should use. Trans has very few miles since rebuild.

 

[chris718]

read customer feedback on my sitr it is dedicated completely to our 2004r valve body kit.give me a call if youd like further info.718 784 4256

 

[wahoo50]

Shift kit

Thanks for the reply. Please advise what your kit costs. I have no experience in auto trans. rebuilds but I think I can install a valve body and certainly can follow instructions. Was unable to connect via phone today.

 

[chris718]

129 and its an easy install if you are patient and careful,our manual on hand wouldnt be a bad idea either

 

[ross87t]

Originally posted by chris718
129 and its an easy install if you are patient and careful,our manual on hand wouldnt be a bad idea either

I had never installed a shift kit on my own in my life. I bought CK shift kit and did it w/ ease. It works perfect too. Firm, fast shifts.

 

[wahoo50]

Shift kit

Thanks Ross87t and Chris. I will order both items tomorrow.

 

[OneLethal87GN]

To: Chris

Chris, do you think your shift kit and big servo could fix a weakened shift from a lesser valve body? I'm looking to get a good BRF valve body to replace the generic one put in by Aamco. My BQ body still has a "stacked-shift" that comes back periodically. The 1-2 shift is decent but can't handle a WOT shift. The band will also lose its grip when you go WOT about halfway through 2nd. The tranny is a BQ model recently rebuilt with a competitor's shift kit, wider band and stock servo.The tranny was redone so many times with different valve bodies I think the guy might have mixed some springs up too. The other shifts are a little firmer during moderate throttle. I haven't beat on the car enough to go through the gears to see if all gears have trouble shifting under WOT, but the few times I have the shfits seemed to do good. BTW, does your kit come with a new plate as my stocker was thrown out due to the new kit having a pre-drilled one with it.