You can type here any text you want

Which upper plenum/ throttle body for my goals?

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

turboc87gn

Darkside in Detroit
Joined
Oct 2, 2008
Messages
2,766
I just obtained a glass beaded stock lower intake from a friend of mine and im wondering use to go with it...I already have a power plate for the stock plenum im gonna install on my rujnning car as is but im acquiring the parts to put together a new engine and my goals are mid 10s...Should i port the upper/lower intake mill off the egr tower and use a spacer with the power plate on the stock plenum with a stock throttle body? Or use the power plate on my stocker,then get a precision/hemco/accufab with the appropriate plate from rjc when im ready to go fast? Ive read that people have gone 9s on the stock throttle body what about the rest? Im not shooting for 9s so i dont wanna spend $$$ on unneeded parts...
 
I'd just cut the EGR off the plenum an use it. ya I am one of the 9 sec guys with a stock plenum. I did bore out the stock TB to 62mm.
 
Back
Top