Who is using an A1000 fuel pump?

[John N]

I'm mounting up a fuel cell in the trunk and an A1000. I am thinking of mounting the pump under the car on the driver side. I would like to know how those using this pump wired it, mounted it, and if an accufab FPR on the stock rails was too restrictive for it. Thanks!

 

[Nick Micale]

We have done many of these installations.

I will be glad to give you the info if you want to call. I do not have the time [or patience] to type a response.

 

[John N]

haha I understand. Will try to give you a ring tomorrow.

 

[Tony Shoaff]

Ams1000

I have one under my car . It is mounted on the d/s I used bolts that went through the fuel cell strap to hold it then drilled two more towards the d/s. I used my hot wire relay for power and ground to the new pump. I have around 700-800 hp and no problems so far. I use the factory regulator and a 1/2" fuel line for the supply line. HTH

 

[John N]

That just about answers it all. I wanted to use the hot wire relay as well so I'm happy that works out.