Wiring the 2 step on the TR6 with orange wire

[1987noblegn]

Ive been searching for a couple of hours (1 hour I dozed off) looking for exactly people have wired the 2 step using the orange wire on the TR6. I need specifics so I don't screw it up. I was thinking of activating it with the brake switch but how would I keep the 2 step from activating every time I hit the brakes? A separate switch?

 

[greeneyegi]

i wired mine to a leaf switch on my shifter,then put a toggle switch where the ash tray is so it only operates when the lighted toggle is on.im wired through my trans brake too.if your just using a rev limiter,same idea it only works when its in first,slam it in d and off it goes.i have a special detent also,so it goes to d not od.

 

[aminga]

Do you mean the brake light switch or the a switch on the brake pedal. There is an old post saying the brake light switch doesn't react fast enough.

 

[1987noblegn]

I was thinking pedal or could I just run it to the fuse box or battery?

Posted from the TurboBuick.Com mobile app

 

[aminga]

Put a fuse on the circuit