blackbuick87
Senior Member
- Joined
- Mar 11, 2002
- Messages
- 3,205
Finally installed my hot wire kit today, I think it made things worse. B4 installing the kit I had 47 psi FP line off, 40psi on (a little high I know) I dont have a gauge at this moment so I cant tell you what my reading is now.
Anyways, I have leaded 110 in the tank now, and when I step on the gas I get popping and missing at 6psi if I tromp on it, or about 16-17psi if I roll into the throttle. Now keep in mind my car has brand new:
coil pack
plug wires
plugs
LT1 MAF and Translator
Today I finally thought to look at my O2's when this is happening and I am in the 850's and higher it looks like (kinda hard to read SM and drive) and I saw a 907 once and a 924 I think
Would high FP cause this to happen.
Tomorrow I hope to have a fuel pressure gauge.
Thanks
Anyways, I have leaded 110 in the tank now, and when I step on the gas I get popping and missing at 6psi if I tromp on it, or about 16-17psi if I roll into the throttle. Now keep in mind my car has brand new:
coil pack
plug wires
plugs
LT1 MAF and Translator
Today I finally thought to look at my O2's when this is happening and I am in the 850's and higher it looks like (kinda hard to read SM and drive) and I saw a 907 once and a 924 I think
Would high FP cause this to happen.
Tomorrow I hope to have a fuel pressure gauge.
Thanks