WTB Built shortblock/longblock

[Adrian87]

Let me know what you have, I'm tired of seeing my car sitting in the front year and I don't have the time/tools/patience to rebuild this engine again.

 

[Cheeseburger]

I am thinking about selling my motor that is in my car now, as i will be stepping up soon.
It is fresh with 0 miles on it just some idle time and i drove the car out of the garage to clean it.
It is the same combo that i ran well into the 10s with at 134mph+ BUT is much stronger (girdle) and has a few more things done to it.

I would sell it as a turn key drop in if you like.

RJC stud girdle/RJC deep sump oil pan and crank scraper/HS roller rockers/std/std crank/Wicked ported iron heads with titanium retainers,forged locks,stainless valves and so on.
Ported stock intake with welded and raised runners.
TA valve covers.
Hyd roller cam etc etc.
Has VERY GOOD oil pressure and no worries at all, sounds great!

Not cheap, but as much motor as you could want!

 

[Scott231]

I have a 30 over 109 longblock that was built by Lonnie Diers of Extreme Automatics with a new crank. Stock cam, freshened heads, and the usual welded up header. Motor was running strong when I bought it. I have since sold the car that it was going into. Lemme know if you are intersted.

 

[Adrian87]

You all have PM's. Thanks!

 

[gnx7]

You have a PM on a built shortblock with zero miles fresh from the machine shop.

 

[49-blues]

I have a standard rebuilt 87 longblock.pm me if interested.

 

[BAGN]

Fresh "109" w/Girdle & Steel caps,Forged Pistons,Deepend Oil Pan,Hydrolic roller Cam,Champion Heads,T&D Roller Rockers,Port Matched intake & everything else you could want. PM me if your serious.

 

[Adrian87]

Alright, I've got some great choices here. Let me get with the builder over the weekend and I'll get back with you guys next week. Thanks again!! I'm really looking forward to getting my baby running again!