WTB Heads,Camshaft,Billit Caps,ARP bolts

greeneyegi

Well-Known Member
Joined
Feb 21, 2010
Am doing a re-build of a stock 87 3.8l.My setup has 100-120k on it.Had weak springs on heads.The lower end bearings need to be replaced.Gonna have a light polish on crank,new bearings.If i can find a good price on used,new billit caps ill use them,put new ARP bolts and call the lower end good.
If i can get a good set of used champion heads,or ready to go ported heads ,hit me up.
Also a 206/206 roller cam setup would be what im lookin for.
Wanna run for a couple years,wed night drags,without havin to open motor up for a couple years,nice and fresh.im in 94564 area for shipping price...im pretty quick to respond.thanks
 
I've got a 206/206 if you're interested. Throwing in bearings doesn't sound like a good idea if they are damaged. They arent a wear item. You need to find what caused the bearing problem
 
I've got a 206/206 if you're interested. Throwing in bearings doesn't sound like a good idea if they are damaged. They arent a wear item. You need to find what caused the bearing problem
the bearings were original,heres pics,it dont look like damage,kinda color change?im not sure.
and yes im interested in the cam,more info
 

Attachments

  • 2012-12-30_11-36-22_726.jpg
    2012-12-30_11-36-22_726.jpg
    1.6 MB · Views: 61
  • 2012-12-30_11-36-28_791.jpg
    2012-12-30_11-36-28_791.jpg
    1.7 MB · Views: 60
  • 2012-12-30_11-36-32_616.jpg
    2012-12-30_11-36-32_616.jpg
    1.7 MB · Views: 54
  • 2013-01-06_16-07-57_205.jpg
    2013-01-06_16-07-57_205.jpg
    1,001.3 KB · Views: 61
  • 2013-01-06_16-08-02_375.jpg
    2013-01-06_16-08-02_375.jpg
    988.1 KB · Views: 53
  • 2013-01-06_16-08-18_868.jpg
    2013-01-06_16-08-18_868.jpg
    1.4 MB · Views: 56
greeneyegi said:
the bearings were original,heres pics,it dont look like damage,kinda color change?im not sure.
and yes im interested in the cam,more info

The rod(s) need to be re-sized/straightened. Mains look ok. Cam is comp 3311 intake and ex
with 109 LS. Has 2* advance ground into it. I can give you an actual cam card in 2* increments if you want it
 
The rod(s) need to be re-sized/straightened. Mains look ok. Cam is comp 3311 intake and ex
with 109 LS. Has 2* advance ground into it. I can give you an actual cam card in 2* increments if you want it
pm'd
 
Top