WTB:New vacuum brake conversion kit and 1 3/4 rear sway bar!

[jretrodude]

WTB:New vacuum brake conversion kit and 1 3/4 rear sway bar! Would like a kit with the vacuum block and pedal assembly. Also needing a thick heavy duty rear sway bar with hardware. Thanks!

 

[J-B Racing]

someone I know have an ATR 1 3/8" Bar

 

[jretrodude]

Cool is it for sale and how much?

 

[J-B Racing]

I will tell him to respond on this ..

 

[jasonlachapelle]

I have an ATR bar. It's 1 3/8". Where are you located ?

 

[jretrodude]

Northern Illinois area

 

[TWIN86GNS]

Over on TurboBuicks.com there was a guy selling a vacuum setup, go check it out, the price seemed great.

Good luck,

 

[jretrodude]

Still looking anything out there?

 

[jretrodude]

I remember a time when there were tons of vacuum brake conversion kits for sale? What happened? Still looking and still needing a rear sway bar

 

[~JM~]

The difficult part is locating the G-Body vacuum assist brake pedal. After that, everything can be purchased from your local NAPA.

I used a dual diaphram vacuum booster & master cylinder from an '87 Monte Carlo. Then pick up a brass "T" to place inline with your PCV for your vacuum source. You can also pick up a new vacuum block with an extra port for the brake line. I chose to use the "T" method instead so I could hide the line better.

~JM~

 

[jretrodude]

I do see the entire kits on here from time to time, I know red regal T used to have a bunch of kits, but he sold all of them.

 

[turbopower87gn]

I have a single diafram set up take $50plus the ride

 

[jretrodude]

Shoot me some pics

 

[rydersv6]

The difficult part is locating the G-Body vacuum assist brake pedal. After that, everything can be purchased from your local NAPA.

I used a dual diaphram vacuum booster & master cylinder from an '87 Monte Carlo. Then pick up a brass "T" to place inline with your PCV for your vacuum source. You can also pick up a new vacuum block with an extra port for the brake line. I chose to use the "T" method instead so I could hide the line better.

~JM~

can't we just go to the junk yard and pick up the brake paddle off a non-turbo car?

 

[hemi8]

http://www.turbobuick.com/forums/threads/spohn-pro-drag-rear-sway-bar.355997/
Mike

 

[turbopower87gn]

get them later tonight

 

[~JM~]

can't we just go to the junk yard and pick up the brake paddle off a non-turbo car?

Yes. If you can locate one. Usually fairly easy to do.

~JM~

 

[turbopower87gn]

hear is the pic

 

[jretrodude]

Turbopower I'm going to pass on that particular setup, looking for something a little cleaner than that.

 

[turbopower87gn]

ok no problem