You can type here any text you want

Yet another MAP question

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

TType85

Well-Known Member
TurboBuick.Com Supporter!
Joined
May 25, 2001
Messages
1,695
I have the MAP sensor hooked up to my powerlogger (the +5v/ground/signal). Is it ok to pull the map signal off there by putting a 2nd wire in the screw-down connector?
 
Sure.. but I would do it a few inches away from the connector on the wire itself. Those terminals are small and not designed for multiple wires to be jabbed into them.
 
Back
Top