Finally...Coach's New Build...

JC Turbo said:
What is going in the round center part ?

Sent from my iPhone using Turbo Buick
Click to expand...
Your gonna have to wait and see. It has a ways to go before its finished. Im modding the valve covers now to match.
 
Nice work, I love the custom parts.

< is jealous of the edm and cnc stuff. Some days I despise cranking handles.
 
Mike E said:
Nice work, I love the custom parts.

< is jealous of the edm and cnc stuff. Some days I despise cranking handles.
Click to expand...

If I could weld like you...I'd be killing this thread with a few more items. I'll have a friend of mine weld them later on.
 
OK Fellas,
I just got my RJC 4 inch exhaust. Next week I will recieve my RJC MEGACOOLER 315-XTF and my Executive Series Billet pulleys. I'll post pics next week. I also sent out my Hemco plenum to be ported and polished and I will show you what is in store for most of the aluminum when my compressor housing from my new 67 HPQ gets back from plating!!! It's about to get real trick.

Thanks
 
coach said:
Well Guys,
I have been saying for a few years that I was eventually going to build a new engine for my car. I have changed combos several times since I bought the car and each has had its pro and cons.
Well I have gathered parts for several years and have saved $$$ and sold parts and traded parts...you name it.
I have also hinted that I would start this thread and after getting my new turbo yesterday...I cant wait any longer!!!
First off,I have a few people to thank for the absolute best information to build one "Killer Buick".
I'm going to start with Brian Lorenz. I saw his Chestnut car run at Norwalk in 2010 and said from that moment on...that's what I want. Well I contacted him, and he has been absolutely awesome. He has pretty much sent me to the poor house, but this car is going to fly.
Next is Miguel...He knows what he did. I dont need to say anymore.
Bison was huge in helping me understand what building a functioning combo means.
There are several others who are involved in this, but their part in the build has not come around yet. They include Cal, Dusty, Vince Janis, and others.

Well lets get to what already has been done or is being done...
Its a 109 stroker being built by one of the best builders of Buicks there are. I do not want to splash his name on the board as he likes his privacy.
The engine will have 3 Billet caps and a RJC Girdle with crank scraper. It uses a BHJ Balancer and JW Flexplate. A factory front cover with one of my custom oil booster plates. New GM Cam sensor with the RJC mod. A factory oil pan modded 1 1/2" deeper and pick up. I have a Killer set of GN1's that have been full race ported and a little hand work. They will use the T&D rockers and shafts. I also have a full race ported Champion factory intake.
On top of that will be a modded 72mm Hemco factory style plenum and 72mm Billet throttlebody. A ported set of Kenne Bell headers modded with EGT bungs and a backpressure bung and then Jet Hot coated inside and out.
The builder hasnt spec'd out a cam yet and I prob wont post it anyway, but it will be a Hydro roller. A Rollmaster chain and all new NOS GM engine sensors are also already to go. A new set of 80# injectors and a heavy wire Casper's inj harness are ready to hook up.
Pushing the air into this monster will be a PTE 67HPQ w/the .85 housing. I just picked it up yesterday from Brian and it is pretty.
I will run the RJC 315-XTF front mount intercooler and the 4 inch single shot exhaust.
I also have a total custom set of Champion valve covers and several other items I will post pics of. I am building or customizing several of the dress up items and will post pics of how I built or modded each item.

I will also be adding a narrowed 8.5 to the rear. I am narrowing it slightly in order to fit my new 15x10 Vector rims in the rear. I am also going to add all new guts and gears and axles to it.
I made the entire rear suspension and have the HR Bar. I have modded my car over the years with all new bushings and all the braces including the GNX rear seat brace I tig welded in.
Im sure I forgot some of the details that I already started , but this is going to be a long thread.

I told Brian last night...I feel like a kid waiting for Christmas!!!

I'll post pics soon.

Thanks
Coach
Click to expand...
subscribed
 
image-3463421623.jpg
image-3237305068.jpg
image-1833914484.jpg
image-1868279642.jpg

Ok fellas....MORE EYE CANDY!!!
I just got my RJC MEGACOOLER and my RJC Executive Series pulleys. My RJC 4 inch exhaust is in the pics too.
I chose the 315XTF intercooler. It's Jason's newest design. He wants some feedback on air temps and engine temps when I get it dialed in.
Enjoy.
 
Squid4life said:
Porn. Pure porn. :)
Click to expand...

Yep. I've got probably 4-5 months before it all starts getting put together...so I'm stuck looking at this stuff and waiting.
 
This thing will def look the part and run the numbers your after Don.. looking forward to spring when we can get this project together and on the track. It will be here before you know it!
 
Limited87 said:
This thing will def look the part and run the numbers your after Don.. looking forward to spring when we can get this project together and on the track. It will be here before you know it!
Click to expand...

Thanks Brian. I want a nice "wheels up" launch pic like the one of your gold car. I can't wait.
 
Subscribed. Post more pictures on Facebook :) or i will just stop by Brians and see this magic happen. In time for Norwalk or will that be pushing it?
 
You must log in or register to reply here.

Similar threads

TireFryer
Stock Bottom End Build
Replies
5
Views
521
TireFryer
TireFryer
H
GREMLIN CONTINUES TO BE PRESENT MAKING DRIVING UNSAFE
2
Replies
29
Views
1K
Ttype6
T
W
Brian Weber
Replies
1
Views
591
J-B Racing
J
D
For sale Competition Engineering shocks. Rear
Replies
6
Views
337
Dhos1
D
N
Built 3.8
2
Replies
21
Views
2K
NITEMER
N
Top