You can type here any text you want

"109" long block F/S Gauging intrest

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

scot w.

GNSperformance.com
Joined
Feb 19, 2005
Messages
8,810
Well I found the motor I want from a buddy but i'm not sure yet if I want to sell my motor. I'm making this post to see who is interested. The engine is still in the car and runs awsome! I even have video of it from Sat the 16th when I was at the 1/8th mi track. here is a quick list of what it has..

This motor was built by conleys in 97'
it used to be one of Jim Anson's motors
"109" block
stock crank
stock rods
stock pistons .020
cam ??
Ported stock heads
Match Ported stock intake (EGR removed)
stock plenum (EGR removed)
stock throttle body
ARP main studs
ARP head studs
high volume front cover
oil pump
water pump
fuel rail

This engine WARM (180deg) at IDLE the oil pressure is around 40lbs.
At a steady cruise at 60mph the oil press is around 60lbs.
At cold start up it's at 75-80lbs press.
This motor has only been up to 24lbs boost only with my 45a and it runs great!! My son and I drove it to Bowling Green this year...
$1,600 would probly take it. price is firm as I don't really need to sell it and it never hurts to have one extra laying around. serious buyers only!! Scot w.
 
Bump up. More info! this engine came from texas and I was told (just rhumor) that it was a conley engine but there really is no way to tell or find out cause conleys don't keep any records of the blocks and numbers...
 
Vote of support for Scot...

Hes a stand up guy and a man of his word, I had good dealings with him. Good luck with the sale.
 
Brer Rabbit said:
Hes a stand up guy and a man of his word, I had good dealings with him. Good luck with the sale.
Thanks for the kind words buddy! the header and crossover finally was put on and no leaks.. Thanks again.. Scot w.
 
Sale Pending

Sale pending, waiting the arrival of the money order. I will keep everyone posted. Thanks Drew! Scot w.
 
scot w. said:
Still have not recived payment yet as of today So??????
After today it goes back up for sale if your interested please contact me. Scot w.
 
>>>>> SOLD!!! <<<<<

I just recived the deposite today. thanks Drew! Scot w.
 
Well I found the motor I want from a buddy but i'm not sure yet if I want to sell my motor. I'm making this post to see who is interested. The engine is still in the car and runs awsome! I even have video of it from Sat the 16th when I was at the 1/8th mi track. here is a quick list of what it has..

This motor was built by conleys in 97'
it used to be one of Jim Anson's motors
"109" block
stock crank
stock rods
stock pistons .020
cam ??
Ported stock heads
Match Ported stock intake (EGR removed)
stock plenum (EGR removed)
stock throttle body
ARP main studs
ARP head studs
high volume front cover
oil pump
water pump
fuel rail

This engine WARM (180deg) at IDLE the oil pressure is around 40lbs.
At a steady cruise at 60mph the oil press is around 60lbs.
At cold start up it's at 75-80lbs press.
This motor has only been up to 24lbs boost only with my 45a and it runs great!! My son and I drove it to Bowling Green this year...
$1,600 would probly take it. price is firm as I don't really need to sell it and it never hurts to have one extra laying around. serious buyers only!! Scot w.
Hey,Scott
If you still have that 109 stock block,,,I take it.
Jerome87
 
Do you realize that post is Sept 2006?? With a deposit in hand, and no more posts since then, its probably gone
 
Yes It's SOLD! as in post #8 in the subject line (>>>> sold <<<<).
 
Back
Top