8 84GNTTYPE Senior Member Joined Aug 6, 2001 Apr 10, 2003 #1 I want to remove the stock radio on an '97 Blazer so I replace it, but I'm not quite sure how to get it out without wrecking anything. I'd appreciate it if someone could tell me how to do this or where I can find out. Thanks!
I want to remove the stock radio on an '97 Blazer so I replace it, but I'm not quite sure how to get it out without wrecking anything. I'd appreciate it if someone could tell me how to do this or where I can find out. Thanks!
P petesgn Banned Joined Nov 3, 2001 Apr 10, 2003 #2 I have a 96 s10 and to remove the radio first you have to remove the dash bezel then you will see the screws holding the radio.
I have a 96 s10 and to remove the radio first you have to remove the dash bezel then you will see the screws holding the radio.
P petesgn Banned Joined Nov 3, 2001 Apr 10, 2003 #4 there are a total of 4 screws holding it. Two of them are on each side of the steering column the other pair are by the dash cluster The rest is held by clips and pulls out. .. Drawings not too good .. Top of dashboard ---------|-----------#-----------------#----------| -------- | | | | Dash cluster |
there are a total of 4 screws holding it. Two of them are on each side of the steering column the other pair are by the dash cluster The rest is held by clips and pulls out. .. Drawings not too good .. Top of dashboard ---------|-----------#-----------------#----------| -------- | | | | Dash cluster |