You can type here any text you want

3bar with ALKY question...

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

turbopat

Member
Joined
Feb 26, 2018
Messages
148
I’m installing my new system from Cal, I’ve run into a little bit of a snag with the map sensor. I have Alky and I have it run to my 3bar under the hood. The new Casper’s harness states that I need to hook my map sensor up to it. There’s only enough room to run the map sensor in the car..... Do I just run an extension wire from the alcohol green wire to inside the cabin and also run the vacuum line inside the cabin? How has everybody else done this?


Sent from my iPhone using Tapatalk
 
You can either splice in a second harness to the current map harness or run a second map dedicated to the xfi with it's own harness. I run a 3.5 bar map for the xfi and a 3 bar on separate harnesses for alky.
 
Will I need to t the xfi map to the same vacuum line?


Sent from my iPhone using Tapatalk
 
Back
Top