You can type here any text you want

4.1 J&E Pistons-6.5" Carrillo Rods-Deep 4.1 Oil Pan

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

9SECVSIX

Member
Joined
May 25, 2001
Messages
520
J&E Custom 4.1 pistons (6 used-2 new spares) 4.020" -9.27" pins 1.287" CH
Used with 6.5" Carrillo rods..narrow journal..oncenter but were machined to work in offcenter block( no problems) . This combo gave 8.5:1 CR with 3.400" stroke. Combo is perfect for 9.500" deck block. Rods have fresh resize now. Deep 14 bolt oil pan with a male 10AN fitting for turbo drain line. 600.00 + shipping for everything..won't sell just the oil pan unless pistons and rods go first..like to sell as a package. Posting pictures soon.
email is best for me.
GN1 "R" 14 Bolt heads complete ready to bolt on with T&D roller rockers, soilid roller springs, hyd roller pushrods, chrome tall valve covers.not recommended for 3.8 due to large 2" intake valves...email me if your interested in details..no ready to get a posting going just yet.
 
Pics ...
 

Attachments

  • 2011_020941pistonsrodspan0001.JPG
    2011_020941pistonsrodspan0001.JPG
    48.6 KB · Views: 251
  • 2011_020941pistonsrodspan0002.JPG
    2011_020941pistonsrodspan0002.JPG
    51.9 KB · Views: 254
  • 2011_020941pistonsrodspan0003.JPG
    2011_020941pistonsrodspan0003.JPG
    52.4 KB · Views: 256
  • 2011_020941pistonsrodspan0006.JPG
    2011_020941pistonsrodspan0006.JPG
    57 KB · Views: 252
Couple more ...
 

Attachments

  • 2011_020941pistonsrodspan0007.JPG
    2011_020941pistonsrodspan0007.JPG
    44.9 KB · Views: 254
  • 2011_020941pistonsrodspan0008.JPG
    2011_020941pistonsrodspan0008.JPG
    61.1 KB · Views: 256
These are very nice pistons and rods, only reason for changing them was to stroke the motor from 3.400" to 3.625" Will except reasonable offers on these parts.NO! the rods have not been hot it's just a poor picture.Thanks.
 
Back
Top