You can type here any text you want

4l80e part id

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

steve66/2004r

Member
Joined
Feb 22, 2008
Messages
39
Started putting this 4l80 back together after being away for awhile. Can't see this part in the ATSG manual or remember where it goes. Need some help!
 

Attachments

  • 1355694358604.jpg
    1355694358604.jpg
    21.3 KB · Views: 77
Todd, I think it goes in the center support but I don't see it in the illustration you posted or in my book. thks btw. It has eight small teeth on the innner diameter and eight waves and is .042" thick.
 
It is the intermediate wave plate from a 4l80e and the 1st picture you have is a 4l60e
 
It is the intermediate wave plate from a 4l80e and the 1st picture you have is a 4l60e

Chris to the rescue again! Thanks, took out clutches and installed wave plate on top of the piston. Reinstalled clutches, plate and snap ring. Got about 045" clearance now. I see it now in the manual. the manual shows one that has 2 teeth on the outside diameter and appears to be dished. Must be different designs. this is a 96 model. mmm, don't know how that other pic got in there. Thanks again.
 
Back
Top