5.7 tt chip for e85?

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

bpman1234

Well-Known Member
Joined
Jan 24, 2011
Messages
2,001
eric this ones for you i got this chip and injector combo it was purchased from tt my ? is the chip was set up for a bigger turbo i think a 60 and i have stock turbo can i run this chip with my almost stock setup with some adjustments that i can do my self with foot pedal ?or will i have to send it in to you?also if i send it in will i be able to make it a 6.1 please reply thanks
 

Attachments

  • IMG458.jpg
    IMG458.jpg
    1.1 MB · Views: 93
Last edited:
You would most likely have to set the WOT fuel as low as it will go, so the fuel curve would be a little funky. You can try it and see, but it might need to be reprogrammed.
It can be converted to a 6.1 chip also.
 
Whats the charge for the conversion and programming.

Sent from my LG-MS910 using Tapatalk 2
 
hi eric just placed an order and paid just want to so know all i have to do is send you the chip above ?order #10777,thanks
 
Ok, but...

You ordered a 5.7 chip.

Here's your notes in the order:
"want to upgrade to 6.1 for use with gen2 for wideband tracking and my combo.thanks"

A 5.7 chip is not a 6.1 chip. Also, a 6.1 chip is not really made for a Gen 2 Translator.

The proper chip for a Gen 2 is the Extender Extreme G chip.

For wideband tracking, you can either use a 6.1 chip with a Powerlogger, or an Extreme G chip (if you have the wideband connected to you Gen 2, which doesn't require a powerlogger).

So, what is it exactly you're looking for? Then we can figure out what chip you need.

Regards,
Eric
 
I have the Gen2also have the powerlogger also have the LC one all connected right now I'm using the pro chip but I bought this e85 combo so I can go e85 I have the three and a half inch maf

Sent from my LG-MS910 using Tapatalk 2
 
Back
Top