You can type here any text you want

50# Injectors + Rail + Wiring, Lower Intake, Accufab 65mm TB, Plenum, Cam + More!

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
Complete 1987 Service Manuals

1987 Service Manuals complete set in two binders $200 Shipped...

ServiceMan.jpg


ServiceMan1.jpg


ServiceMan2.jpg
 
Bosch 0 280 160 237 Regulator $15 shipped

FuelPR.jpg


Stock valve covers with lift bracket $40 shipped

VCs.jpg


Miscellaneous stuff $25 shipped

MiscStuff.jpg
 
Probe Forged Pistons, Rings and Rods
These pistons are brand new. I paid $555.00 for the piston and rings plus another $90 to have the rods resized and another $24 to R&R the pistons. A total of $669.00
The Piston are .030 and are race quality. The rods need some cleaning since they sat in the basement for 5 years.

Now $360 shipped...

Probe.jpg


Probe1.jpg


Probe2.jpg


Probe3.jpg
 
Sunday price drop and update...

Probe Forged Pistons, Rings and Rods

Now $350 shipped...

1987 Service Manuals complete set in two binders

Now $180 Shipped...

Casper's Electronics Cam Sensor Cap - New

Now $40 shipped...

High temp powder coated silver stock headers and cross pipe.

Now $230 shipped...

Miscellaneous stuff (see picture above)

$20 shipped...

-------------------------------------------------

PENDING...

Bosch 0 280 160 237 Regulator: Pending...
Stock valve covers with lift bracket: Pending...
-------------------------------------------------

SOLD...

50# Injectors + rail + wiring
Ported powdercoated lower Intake
Accufab 65mm Throttle Body and Plenum
Buick Turbo REV X3 Buick turbo 218/222 cam
15 Row High Performance Intercooler
FRONT COVER WITH HIGH VOLUME OIL PUMP with High Flow Buick Water Pump
BILLET VACUUM BLOCK FOR 86/87
Working coil with plate and Taylor wires

-------------------------------------------------
 
Probe Forged Pistons, Rings and Rods

Now $350 shipped... or $380 with Rod and Main Bearings

87 stock Mass Air Flow sensor

$120 shipped...

Massflow.jpg


Massflow.jpg


Billet water neck with new 160 degree thermostat

$35 shipped...

Waterneck.jpg
 
Not Buick related but I hundreds of XXX movies. Movies are brand new unopened and vary in length. Sorry guys, can't post pics of them :rolleyes:
5 for $30 shipped...

Stock Turbo Cover

$35 shipped...

Turbocover.jpg
 
Rear main seal and cam button - Both New

$20 shipped...

Parts.jpg


O2 sensor, oil sensor with block and a dingy

$25 shipped...

Parts1.jpg


Good stock rockers

$35 shipped...

Rockers.jpg


Crank pulley and IC fan

$40 shipped...

Fanpulley.jpg
 
billet neck /caspers cam tool

ill take them,send payment info,or call me 708 953 1908. thanx, vik.
 
Monday Morning Price Drop and Update...


Rear main seal and cam button - Both New

$15 shipped...

O2 sensor, oil sensor with block and a dingy

$20 shipped...

Good stock rockers

$35 shipped...

Crank pulley and IC fan

$35 shipped...

Probe Forged Pistons, Rings and Rods

Now $325 shipped... or $350 with Rod and Main Bearings

1987 Service Manuals complete set in two binders

Now $170 Shipped...

Miscellaneous stuff (see picture above)

$15 shipped...

Stock valve covers with lift bracket

$40 shipped...

87 stock Mass Air Flow sensor

$100 shipped...

Stock plenum (power plate is sold)

$20 shipped...

Stock Turbo Cover

$30 shipped...

-------------------------------------------------

PENDING PAYMENT...

Casper's Electronics Cam Sensor Cap - New: Pending...
Billet water neck with new 160 degree thermostat: Pending...

-------------------------------------------------

SOLD...

50# Injectors + rail + wiring
Ported powdercoated lower Intake
Accufab 65mm Throttle Body and Plenum
Buick Turbo REV X3 Buick turbo 218/222 cam
15 Row High Performance Intercooler
FRONT COVER WITH HIGH VOLUME OIL PUMP with High Flow Buick Water Pump
BILLET VACUUM BLOCK FOR 86/87
Working coil with plate and Taylor wires
Bosch 0 280 160 237 Regulator
High temp powder coated silver stock headers and cross pipe
RJC Power Plate
-------------------------------------------------
 
Monday night Valentines out the door price!

Last price drop on these...

Probe Forged Pistons, Rings and Rods

Now $300 shipped... or $325 with Rod and Main Bearings

Someone buy them before they go to eBay! They are new and at half the cost of what I paid for them... My loss... your gain! :)

I also have a Turbo Tweak chip for 50# injectors w/ Alcohol, 23 / 21 deg., 23-25 psi... paid $75... Yours for $35 shipped...
 
Tuesday Morning Price Drop and Update...

Tuesday Morning Price Drop and Update...

Rear main seal and cam button - Both New

$15 shipped...

O2 sensor, oil sensor with block and a dingy

$20 shipped...

Good stock rockers

$30 shipped...

Crank pulley and IC fan

$30 shipped...

Probe Forged Pistons, Rings and Rods

Now $300 shipped... or $325 with Rod and Main Bearings

1987 Service Manuals complete set in two binders

Now $160 Shipped...

Miscellaneous stuff (see picture above)

$15 shipped...

87 stock Mass Air Flow sensor

$90 shipped...

Stock plenum (power plate is sold)

$18 shipped...

Stock Turbo Cover

$25 shipped...

Turbo Tweak chip for 50# injectors w/ Alcohol, 23 / 21 deg., 23-25 psi

$30 shipped...
-------------------------------------------------

PENDING PAYMENT...

Casper's Electronics Cam Sensor Cap - New: Pending...
Billet water neck with new 160 degree thermostat: Pending...

-------------------------------------------------

SOLD...

50# Injectors + rail + wiring
Ported powdercoated lower Intake
Accufab 65mm Throttle Body and Plenum
Buick Turbo REV X3 Buick turbo 218/222 cam
15 Row High Performance Intercooler
FRONT COVER WITH HIGH VOLUME OIL PUMP with High Flow Buick Water Pump
BILLET VACUUM BLOCK FOR 86/87
Working coil with plate and Taylor wires
Bosch 0 280 160 237 Regulator
High temp powder coated silver stock headers and cross pipe
RJC Power Plate
Valve Covers
-------------------------------------------------
 
Good morning! I am interested in the rocker arms and crank pulley/IC Fan. Can I get pictures of them ASAP? clinton.gaston@gmail.com



Sent from my iPhone using Tapatalk - CGASTON
 
Seen the pics? Send me a private message and we will work the payment shipping issue.. Also, do you still have to coolant neck? How much?
 
Hooker Headers Cat-Back Exhaust System with no mufflers. The pipes have about 800 miles on them and the test pipe and the Y pipe have both been hi temp powder coated. Pipes haven't been used since they have been powder coated. I didn't wash the Y pipe off so any dark areas on it is just coating dust and dirt... Quite a bit of money was spent in getting the pieces powder coated...

$275 shipped...

Exhaust.jpg
 
Wednesday Morning Price Drop and Update (combined a couple items)...

O2 sensor, oil sensor with block, a dingy (Pic in post #29), miscellaneous stuff (Pic in post #22), rear main seal and cam button - Both New (Pic in post #29)

$40 shipped...

Probe Forged Pistons, Rings and Rods with Rod and Main Bearings (Pic in post #23)

Now $295 shipped

1987 Service Manuals complete set in two binders (Pic in post #21)

Now $150 Shipped...

87 stock Mass Air Flow sensor (Pic in post #26)

$90 shipped...

Stock plenum (power plate is sold) (Pic in post #27)

$18 shipped...

Stock Turbo Cover (Pic in post #28)

$25 shipped...

Turbo Tweak chip for 50# injectors w/ Alcohol, 23 / 21 deg., 23-25 psi

$25 shipped...

Hooker Headers Cat-Back Exhaust System with no mufflers (Pic in post #37)

$225 shipped...

Not Buick related but I hundreds of XXX movies. Movies are brand new unopened and vary in length. Sorry guys, can't post pics of them

5 for $30 shipped...


-------------------------------------------------

PENDING PAYMENT...

Casper's Electronics Cam Sensor Cap - New: Pending...
Billet water neck with new 160 degree thermostat: Pending...

-------------------------------------------------

SOLD...

50# Injectors + rail + wiring
Ported powdercoated lower Intake
Accufab 65mm Throttle Body and Plenum
Buick Turbo REV X3 Buick turbo 218/222 cam
15 Row High Performance Intercooler
FRONT COVER WITH HIGH VOLUME OIL PUMP with High Flow Buick Water Pump
BILLET VACUUM BLOCK FOR 86/87
Working coil with plate and Taylor wires
Bosch 0 280 160 237 Regulator
High temp powder coated silver stock headers and cross pipe
RJC Power Plate
Valve Covers
stock rockers
Crank pulley and IC fan
-------------------------------------------------
 
I received everything yestereday as promised. Everything looks as described and thanks for a great deal. Thanks :cool:
 
Back
Top