86-87 parts

[WeSS]

$3,500.00 for everything or priced separately

ATR stainless 2.5 inch dual exhaust complete with cat delete pipe. $500.00 This is for gnx rear suspension cars not stock 4 link.

ATR 3 inch external gate downpipe with wastegate $375.00

TE series precision turbo $400.00 I believe it's a te60 series.

Precision hydraulic roller cam part #'s are as follows:
Precision Turbo & Engine y-3175 bv6 - 210 - HR 10

Roller cam, roller lifters, rollmaster double roller chain, 8.150/.080 push rods, & roller cam button. $500.00

GNX style stewart warner gauges make offer on complete set. 160 speedo, 8000 tach, 30 psi boost gauge, oil, water, & fuel. $400.00

3 inch inlet out let front mount intercooler. $500.00

Stock exhaust manifolds $125.00

Stock drive shaft $50.00

Used set of gn emblems with the intercooled emblems. $100.00

109 turbo short block rjc girdle, rjc crank scraper, 20 bolt oil pan, 2 dot rods with arp 2000 rod bolts, turbo crank, stock balancer, .60 over je pistons, arp main studs, etc. $1,500.00 un assembled. Clean bill of health from the machine shop.

Tampa bay area is location. The large items I can drop off if you arrange shipping. Small items I can package and ship via usps. I will provide pictures for serious inquiries. PM/email paypal accepted if you pay the fees. Postal money-orders as well.

 

[earcher1]

im interested in the down pipe.can you show me a picture please?

 

[David Husek]

PM Sent, interested in ATR stainless 2.5 inch dual exhaust.

 

[WeSS]

my parts for sale

im interested in the down pipe.can you show me a picture please?

Replied via pm

PM Sent, interested in ATR stainless 2.5 inch dual exhaust.

Emailing you pics.

All others pm's have been responded to.

Reasonable offers considered. Large items I will drop stuff off at shipper of your choice and you pay the shipping/handling. I will give you the zip code to find a local shipper. I have smaller boxes and will package smaller items at no charge. You pay the shipping.

Paypal accepted please add 3% if not then I accept postal money-orders.

 

[WeSS]

parts

3 inch downpipe/external wastegate sold

Also have 2 more items. A detroit locker for 31 spline axles Ford 9 inch. Excellent shape. Went back to a trac loc clutch style posi. $200.00

G body gas tank sumped. $150.00

 

[WeSS]

Parts

Locker sold.

 

[BIGPSI]

got any pics on the complete roller cam set up?

 

[WeSS]

parts

got any pics on the complete roller cam set up?

Working on packing previously sold items today and will get more pictures of what I have.

 

[WeSS]

parts

Due to not being able to provide the complete gauge package I am selling the gauges individually. Only the speedometer & tachometer are still available.

Sale pending on the exhaust system.

Thanks to everyone who has purchased and those for their interest.

 

[BIGPSI]

Working on packing previously sold items today and will get more pictures of what I have.

cool thanks. i tryed looking up that part # but no luck. how about specs also

 

[WeSS]

cam

cool thanks. i tryed looking up that part # but no luck. how about specs also

Towards the end of the cam between the last lobe and back end of the cam it say Comp EP 4010 and on the back end it has Precision Turbo & Engine Y - 3175 bv6 - 210 - HR10

 

[WeSS]

pictures

Here is the picture of the cam kit. I was unable to find the small sprocket for the rollmaster double roller chain so I took the pics without it.

 

[GNX 120]

Here is the picture of the cam kit. I was unable to find the small sprocket for the rollmaster double roller chain so I took the pics without it.

Wess, thanx for the parts as described fast shipping no bull. THANX KERRY

 

[WeSS]

cool thanks. i tryed looking up that part # but no luck. how about specs also

got any pics on the complete roller cam set up?

Thanks to Dan from DLS for providing me with the specs for my cam.

Dan Strezo
to me

show details 1:52 PM (1 hour ago)

Wes,
That is a 210 duration hydraulic roller ,austemper version. Spec are :


Duration @ .006 259
OPEN CLOSE
Events @ .050 Int 5- BTDC 35 ABDC 110 Degree lobe separation
Ex 35 BBDC 5- ATDC .317 Lobe Lift
.491 Valve lift

 

[SPOOLN6]

Stock exhaust manifolds $125.00

Interested. Can you send me pics?

Thanks

 

[WeSS]

manifolds

Interested. Can you send me pics?

Thanks

The passenger is nice the driver like most has been cracked and rewelded multiple times. Not the prettiest but still effective. I will get some pics for you as soon as I can. Thanks

 

[kaj]

pictures of:

Used set of gn emblems with the intercooled emblems. $100.

??

 

[WeSS]

parts

ATR stainless 2.5 inch dual exhaust complete with cat delete pipe. $500.00 This is for gnx rear suspension cars not stock 4 link. SOLD

ATR 3 inch external gate downpipe with wastegate $375.00 SOLD

TE series precision turbo. I believe it's a te60 series. After having it inspected there seems to be play between the compressor and exhaust so I am no longer going to offer this turbo unless I send it to PTE to have an inspection or rebuild.

Precision hydraulic roller cam part #'s are as follows:
Precision Turbo & Engine y-3175 bv6 - 210 - HR 10
Thanks to Dan from DLS for providing me with the specs for my cam.

Dan Strezo
to me

show details 1:52 PM (1 hour ago)

Wes,
That is a 210 duration hydraulic roller ,austemper version. Spec are :


Duration @ .006 259
OPEN CLOSE
Events @ .050 Int 5- BTDC 35 ABDC 110 Degree lobe separation
Ex 35 BBDC 5- ATDC .317 Lobe Lift
.491 Valve lift

Roller cam, roller lifters, rollmaster double roller chain, 8.150/.080 push rods, & roller cam button. $450.00

GNX style Stewart Warner gauge 160 speedo, 8000 tach $200.00

3 inch inlet out let front mount intercooler. $350.00 without pipes.

Stock passenger side exhaust manifold and crossover pipe was cut and extended for the girdled motor I have for sale. Driver side is unavailable. Offers???

Stock drive shaft $50.00 obo

Used set of gn emblems with the intercooled emblems. $75.00 not mint shape but good for a driver

109 turbo short block rjc girdle, rjc crank scraper, 20 bolt oil pan, 2 dot rods with arp 2000 rod bolts, turbo crank, stock balancer, .60 over je pistons, arp main studs, etc. $1,500.00 un assembled. Clean bill of health from the machine shop.

Standard crank measurements are supposed to be as follows:

Main 2.4990 - 2.5000
Rod 2.2487 - 2.2499

I just pulled the wrap off this crank and measured it.

Main 2.4950
Rod 2.2450

Adding pictures of the crank. Will add pictures of the rest of the stuff in a little while.

 

[WeSS]

add pics

Pics of the long block assembly & the cut and extended crossover pipe for girdle with passenger exhaust manifold. Also stock driveshaft. Will add intercooler pictures in the a.m.

 

[WeSS]

Added intercooler pictures

3 inch fmic pics