You can type here any text you want

Alky control new kit issues

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

8kllr

Member
Joined
Mar 11, 2022
Messages
46
Just finished install,did all the tests.tpok car out for a drive wants to die no power ran it up and down street a few times no change.put in garage idle just fine
Any ideas
Could it be map sensor and can I put old 2 bar back in and try it
 
Original MAP was there to run the dash boost gauge only.
U have a stock ecm?
 
I got it the damn hose into the throttle body popped off went over car for 2 hours and missed it called alkycontrol talking to them and looking at front of car I finally see it.i feel like a dumbass
Turbo maxes with 20# and gain on alky on 3 car runs well now next weekend LS1 maf and translator
And mbc
 
Stock turbo loves 24 psi on meth. It is like a whole nother car at that level.
 
I can't get over 20 lbs.
With alky control on 8
I do have a bad drivers header leak which just bought a pair that's been repaired hopefully when I put this on it will fix my issue sometimes I can run it a 6.5 rough and no knock the sometimes I have to put it to 8
I don't know
 
I do have a bad drivers header leak which just bought a pair that's been repaired hopefully when I put this on it will fix my issue
The exh leak is a MAJOR player in this situation.
A suggestion: Quit trying to commit "crankshaft suicide" and fix the exh system, log some useful data, and stay out of hi boost.
 
Back
Top