black magic
Black Magic
- Joined
- Jun 24, 2011
ok so today i installed a new 46mm external wastegate downpipe. after installation i started the car drove up and down the block, then pulled back into the driveway, and it was idleing then stalled. i went over all starter wires, batter cables, alternator wire, anything that the downpipe couldve burned and everything was tight and ok. i throught the battery charger on it and the translator genII measured volts at 13. 7 wen on charger, then when car was running it measured 10.4 volts. could there be other ground wires that are giving me a problem or bad alternator giving me a problem. and also never had this problem before down pipe installation. Any help is very appreciated!!!