Aluminum brake drums and more!!

[tbone87]

Aluminum break drums 100$SOLD
High boost wheel cylinders new 30$SOLD
Nice positive and negative battery cables both 50$SOLD
Good injector harness 30$SOLD
Air bag kit installed but never went down the road 40$ SOLD
Stock radiator record 50$
Stock sway bar 30$
All 4 stock springs 50$
9in Kenny Bell air filter 15$
Under drive crank pully with aluminum hub 30$
Stock rocker arms and shafts with push rods 30$
Cruise control cable and bracket 25$
Lower stock control arms bushings ok 40$
All plus shipping and PayPal fees
PayPal is tbone8267@yahoo.com thanks. HAPPY HOLIDAYS and be safe... I need a HVC coil for a 7al box if want to trade too.

Posted from the TurboBuick.Com mobile app

 

[Heisenberg]

aluminum brake drums - 1st
Is this $100 for a pair?
Any idea as to the inside dimension or "meat left"

AND - Battery PO & NEG cables
Positive has a known good, ECM connector and never molested?
NEh has the not molested grounds for inner wheel well?

If so - sold

 

[Bescurred]

2nd for drums...damn you Heisen!!!

 

[tbone87]

aluminum brake drums - 1st
Is this $100 for a pair?
Any idea as to the inside dimension or "meat left"

AND - Battery PO & NEG cables
Positive has a known good, ECM connector and never molested?
NEh has the not molested grounds for inner wheel well?

If so - sold

Damn can I get a hundred a piece lol ya 100$ for the pair. Battery cables in great shape I will post a pic I can mike the rotors. U can call me if u like will pm u my # come. Of my 58k car

Posted from the TurboBuick.Com mobile app

 

[Heisenberg]

Damn can I get a hundred a piece lol ya 100$ for the pair. Battery cables in great shape I will post a pic I can mike the rotors. U can call me if u like will pm u my # come. Of my 58k car

Posted from the TurboBuick.Com mobile app

LOL - dood - just trying to be a bidness man here and double check my facts
Reminds me of a funny story
Bought in a hurry off EvilBay - Aluminum drums - or Aluminum drum; singular - can't recall - 75 bucks
Thought I had scored
Got the box- thought - hmm..pretty small box for two brake drums..weird.
Yeah - one drum - went back and looked at the ad - yeah - singular, as in ONE drum - Disappointed
FleaBay got me again.

And no - you cannot get $100 a piece. From me.
But while not as rare as an 8 track player - they ain't exactly laying all over the boneyard either.
They are one of those pieces that are semi hard to find.
Because, if the truth is they were only availalbe on Non-G80 posi units, they darned sure weren't ordered on many regular Regals or GM 4-3/4 stuff either.

Drums can be tough to measure
The best way to measure is of the inside diameter. Not the thickness. But I think you can

The only specs I really have are ID.
I think the max is 243.5mm
Before they shred and destroy my 500 dollar wheels and pierce my gas tank causing a huge fireball. All cause I just had to save 10 lbs.

 

[Heisenberg]

2nd for drums...damn you Heisen!!!

How many sets of aluminum drums do you really need?
I've got mouths cars to feed here man

 

[Heisenberg]

2nd for drums...damn you Heisen!!!

I'll give you a set of steels I used to stand on last week at the junkyard.

 

[Heisenberg]

2nd for drums...damn you Heisen!!!

You know, if it were Christmas time - I'd say - "awww..you go ahead and sell them to Bescurred - I'm in the holiday spirit."
Too bad for Bescurred it isn't Christmas - yet.

 

[Bescurred]

Lol, I need a set...don't have any

Tomorrow is Christmas

 

[Heisenberg]

You said:

I need a HVC coil for a 7al box if want to trade too

You need a what for a what?
I interpreted this to mean you need a Heater Core for a VIN 7 car
Or an evaporator coil for an air box?
Or a condenser coil for a something box.
Or a flux capacitor for a Delorean

 

[datquick6]

Pics of airbag kit?

 

[Heisenberg]

Lol, I need a set...don't have any

Tomorrow is Christmas

Wrong.
Tomorrow is the day BEFORE Christmas.
Don't go tryin' to scam me.!
Neither Santa nor the god of Buicks likes fibbers

 

[tbone87]

I trying to get home been waiting an hour for a pizza damn!!

Posted from the TurboBuick.Com mobile app

 

[tbone87]

Msd 8261 hvc coil u guys is funny

Posted from the TurboBuick.Com mobile app

 

[Heisenberg]

Msd 8261 hvc coil u guys is funny

Posted from the TurboBuick.Com mobile app

I knew I shoulda bought some of those weird looking red things when I see them for sale
Sorry - but no!

 

[tbone87]

Those little red things are high$$$

Posted from the TurboBuick.Com mobile app

 

[Heisenberg]

I trying to get home been waiting an hour for a pizza damn!!

Posted from the TurboBuick.Com mobile app

Ordering pizza is tough!

 

[tbone87]

The drums I measured is like .250 look to have plenty of meat. Just pulled off today.

Posted from the TurboBuick.Com mobile app

 

[tbone87]

Here u go fellers!!!

Posted from the TurboBuick.Com mobile app

 

[Heisenberg]

Is that a groove in the one drum?
What's the other one look like?
Do they need to be turned - not the end of the world - but are they scarred deep?

I know you mentioned you had them on your car - but you did not mention you were running on rivets!
Depending upon answer - we can try to figure out how much meat they have left.

As far as the starter cables....ummmm..how do I say this politely...
I can't see sh1t!!
It's like looking at the Snake cage at the zoo....
I just want to make sure the battery side ends and engine side ends are good as stock.
or - I can take your word
A Buick man's word is good enough