Look at these two powerlogger files. 000 I didn't lock the tcc, 001 only thing changed is a little more alky and programmed tcc wot lock at 76 mph. I can see the rpms level out at lock up but by the time I get to the end of run rpms seems to match each other.
This is on a low mile (under 3000) 3000 stall 9x11. I did leave the checkball in the end of the input shaft.
Thanks,
Mike
This is on a low mile (under 3000) 3000 stall 9x11. I did leave the checkball in the end of the input shaft.
Thanks,
Mike
