Basic Chip Questions; Extender, Exteme

[Jerryl]

Couple of very basic dipswitch questions;
1 - What are the dipswitches to be set in the Translator at with the Extender?
2 - What are they supposed to be set in the Translator+ with the Extreme?


PL picture is for a car with the Extender.
1 - What is the bottom BLM in this chip? (In other words; Are the BLM cells 3,7 bottomed out at 118?)
2 - What load area are BLM cells 3 and 7?
3 - What adjustments (if any) would you suggest? (FP is 45 static)

 

[Eric Stage I]

Hey Jerryl,

Extender ON,ON,OFF,OFF
Extreme ON,ON,ON,ON

On the BLM cells, those may be the decel cells, in which case it's not uncommon for those to be on the low side. I don't think that's the bottom limit. I don't think I would make any changes for that.

Eric

 

[Jerryl]

Hey Jerryl,

Extender ON,ON,OFF,OFF
Extreme ON,ON,ON,ON

On the BLM cells, those may be the decel cells, in which case it's not uncommon for those to be on the low side. I don't think that's the bottom limit. I don't think I would make any changes for that.

Eric

Eric, as always;
Thank you for the undying and unrelinquished support and teaching!
I really look forward to shaking your hand some day.

 

[Jerryl]

...