Best 60ft on drags!

[TURBOV6]

Anyone?

 

[slimm]

I have never used them, but I have heard people getting 1.7xx-1.6xx on drag radials. If you really want a good 60' time, get slicks.

slimm

 

[c&cgn]

With Nitto's I usually run around 1.77 to 1.81 with a best ever of 1.72.

I'm sure I could do better if the Nitto's were on 15x8" rims instead of the stock rims, but ya make do with what ya have.

MT ET Drags 26x10 I have had consistent 1.6's with a best of 1.61

 

[GNSS]

60's

I had a best of 1.62 on Nittos
And a few high 1.6x's. Its all in the track prep.

Jeff

 

[TURBOV6]

I got a set of Centerlines rims and a set of BFG's 275/50/15 Drag radials.

 

[PsychoBuickBoy]

1.62 on ET Streets
1.84 on Futura (Pep Boys) Radials - 255-50-16!!!!!

 

[quickt]

I ran 1.57 with Hoosier quick time pros.

Lonnie Diers

 

[gnx7]

I've gotten a string of low 1.71 and 1.72 60ft times on heavily worn 245/50/16 Nitto DR's. Need a smokey burnout and 18psi pressure when hot.

I've only run 26x8.5" slicks once with low boost launch (5psi) and a 1.70 60ft time.

With practice repeatable 60fts times in the 1.70's should be easy. With the Nittos brand new I pulled off some low 1.8's and then a best of 1.78 with only 500 miles on them. The more worn the Drag Radials get... the better they get.

-GNX7

 

[RickWI]

With a massive, fill the car with smoke, burn out and no hop I got consistant 1.62 - 1.63's with 255/16 drag radials @14 PSI. When I got to the strip I just drove right on (I drive to the track) and at 35 PSI and a little ditty burnout I got a 2.68 and spun into third. The drag radials really hook with low pressure.