Billet Hard Parts ??

[CPAKCP]

Hi guys first time to post here as I know very little about transmissions. We have a local tranny guy who has built our performance trannys and has done a fair job - however a few of us are starting to push the 500-600 hp range and I don't know if our tranny guy is keeping up?? We all have the larger pumps, hardner stator shafts / billet servos / coolers....etc.

I want to lauch the car with 12-18 lbs of boost. Are there any new billet hard parts you could recommend that would help my transmission live!!

Thanks in advance


James

 

[Clay Thompson]

Billet Parts

Look here for the best billet parts http://www.2004rperformancecenter.com/

To make your 200 4R less likely to break under high horsepower you need the billet input shaft, the billet forward drum and the billet band anchor--PTS is also supposed to be developing a stronger forward planet.

To make your trannie work right you need the wide band and PTS shift kit and a number of other parts. Search the trannie section to find answers to specific questions but the best thing to do is to read this thread http://www.turbobuick.com/forums/showthread.php?s=&threadid=31365

PTS supplies parts to builders around the country and your best bet is to talk directly to Bruce (THE MAN) Toelle. He's to the 200 4R like Someky Yunick was to the small block chevy.

 

[HOTTOGO]

Read "strenghtening the 2004r"

at the top of the posts then go here to see and get what you need to make it live. http://www.2004rperformancecenter.com