You can type here any text you want

Black smoke

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

jacksorroche

New Member
Joined
Feb 24, 2003
Messages
279
I got the engine started!! Thanks to all

Now the engine runs very very rough and there is a ton of black and white smoke. I think that it is running very rich, but am unsure how to lean it out. I also did a diagnostic and I get the 12 code, then the engine light goes out and the fuel relay starts clicking again. :confused: :confused:

My setup is as follows:
TE44 turbo
MotoTron 60# injectors
Stock IC (Until I get the streach IC)
30 over 109 block
62mm Throttle body
TH 3" down pipe

I appriciate all help.
 
I think you will need a chip burnt for the translator. Someone please verify.
 
You can't run a stock chip with # 60 injectors. Get a Turbotweak or extender and you'll be set. :)
 
No special chip is required for the translator set up.
 
Talk to Eric@turbotweak, he will set you up with a good burn, because you definately need a chip for injectors that are that big :eek: . You can get a hold of him at www.turbotweak.com .

,Dan
 
Back
Top