Blew up the 2004R....suggestions?

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

YellaGN

Member
Joined
May 27, 2005
Messages
154
The nitrous finally took its toll on my tranny. Ive been spraying a 100 shot on top of 22 psi. I need a new tranny capable of 9's with a tbrake. I also need a new convertor. I was using an Art carr 9'' 3200 stall. A little laggy but not bad. Looking for about a 3400 stall. Any opinions on tranny and stall?
 
THM400 and 3200 to 3400 stall. With the nitrous, you don't need any more stall.
 
With a gear vendor on the back and a fully automatic forward pattern transbrake and mechanical modulator.:cool:
 
I run a TH400 reverse pattern w/brake, 600 passes so far with no problems and I built it myself :cool: Should be good for 9's. As for converters, I broke 4 sprags in Precision converters. Performance was ok but reliability wasnt. Currently waiting on a fuel&blown ATI from Anderson, hopefully will work better.
 
Yella,
I have a BOP TH400 core that I need to build or scrap the case. I'm about 4-5 hours drive away from you, but if you need a unit built, let me know.
 
Currently waiting on a fuel&blown ATI from Anderson, hopefully will work better.


That's the convertor I installed in my TH400 conversion this week. Post back with how yours works, as my GN is done for the winter. Brian
 
Back
Top