You can type here any text you want

boost controller line routing(picture)

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

blackgn1

Set on TSM Boost
Joined
Jan 2, 2007
Messages
2,332
By searching the forum I came up with this being the proper way to route the boost controller lines. Does this look right? Also the controller has a + and - Is turning the knob all the way to - turning the boost down. Turning it toward the + is increasing the boost?
 

Attachments

  • boostcontroller.jpg
    boostcontroller.jpg
    59.1 KB · Views: 264
NO!!!!!!

:)

the line from the turbo goes to the side port. (ok, the wastegate is mounted sideways, so the LEFT port in that pic)


T into that and run to the IN on the regulator.

OUT on the regulator goes to the "Top" port (the RIGHT one in the pic)

Bob
 
can't see the label on the regulator. can you take a close-up of it?

Bob
 
Kinda confussing with the wastegate laying down isn't it. Let me go snap a picture leaving the lines as is. I do believe they are wrong though.
 
wastegate connections

found this pic.

Bob
 

Attachments

  • wstgate.gif
    wstgate.gif
    11.5 KB · Views: 224
Bob you are correct. The top port of the wastegate is actually on the front of the wastegate when mounted on this pipe.
 

Attachments

  • boostcontroller2.jpg
    boostcontroller2.jpg
    70.5 KB · Views: 217
Back
Top