Hello, im looking to hook my factory boost solenoid back up. Right now its hooked up "tuner style" with a lorenz manual boost controller. Trying to find a drawing or diagram for where the vacuum lines go from the boost solenoid to the turbo/wastegate so i can control it from the ECUGN tuner software. Thanks
Boost solenoid hookup for ECUGN
- Thread starter MN250R
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
- Joined
- Jun 18, 2001
- Messages
- 2,240
The stock wastegate is a single-port that used a vacuum Y fitting with a restrictor in it. If you don't still have that part, it won't work. It doesn't work that well anyway.
You want is this valve:
You can wire it to the stock boost control wiring, it's plugged into the right input for the electronic boost control in the ECUGN.
You want is this valve:
Electronic Boost Control (EBC) Solenoid Kit
Control your turbo with our EBC Solenoid Kit. Run single solenoid or a dual dome pressure boost control strategy, no external controller needed
diyautotune.com
You can wire it to the stock boost control wiring, it's plugged into the right input for the electronic boost control in the ECUGN.
The stock wastegate is a single-port that used a vacuum Y fitting with a restrictor in it. If you don't still have that part, it won't work. It doesn't work that well anyway.
You want is this valve:
Electronic Boost Control (EBC) Solenoid Kit
Control your turbo with our EBC Solenoid Kit. Run single solenoid or a dual dome pressure boost control strategy, no external controller neededdiyautotune.com
You can wire it to the stock boost control wiring, it's plugged into the right input for the electronic boost control in the ECUGN.
Great, Thanks!
