broken coil pack coupler....

[p.dow]

while installing a replacement coil pac one of the male couplers bent off and broke from the pac.

i am wondering if there is a way to reattach that male coupler .

these are the couplers that stick out of the bottom of the coil pac and are attached to the coil pac module wires (female).

i got out my solderer out and contemplated soldering it back together but decided i would probably bugger it up.

can this unit be saved ??

thanks

paul

 

[John Larkin]

Absolutely. I did the same thing. I soldered it well, then JB Welded over the solder joint and under it for support. Once dry, it'll probably be stronger than the rest of em.