Built 109 Short Block

[m233roller]

I have a nicely built 109 short block with less than 1500 miles on it. Has NO problems what so ever and ran great ! Guy just went to a LS-1 turbo conversion.
Block was sonic tested, magged, squared up, line bored, bored 30 over and set up for the girdle. It has the RJC girdle, stock rods and a stock turbo crank turned 10 - 10. Complete rotating assembly was balanced. Pistons are forged TRW with Seal power rings. Bearings are Federal Mogul and there are ARP rod bolts, main studs and head studs. Cam is a flat tappet 206-206 and has a true roller timing chain. Engine had good oil pressure and comes with timing chain cover on it and new water pump, also has front balancer and stock flex plate. Oil pan is there but now has a good dent in the front corner of it. If interested I can get you pics. and send them. Will need an email address to send them to.
Price is $2000 FIRM plus shipping and paypal fees. Thanks Mike

 

[Toxic Donkey]

Where are you located

 

[larrym]

good deal for girdled motor even if you have to go through it.

 

[84BuickGNYorkPA]

Surprised it's still for sale at that price.... GLWS.

Chuck

 

[William Barnhouse]

Can you send pictures and location to wbarnhouse@nc.rr.com
Thanks,
Billy

Posted from the TurboBuick.Com mobile app

 

[jim homick]

please email pics to jhomick@hotmail.com

 

[William Barnhouse]

Hey call me on the short block.
9194226746
Thanks,
Billy

Posted from the TurboBuick.Com mobile app

 

[m233roller]

Ok guys here's pics. of this girdled short block and you can see in the one pic. that the cross hatch is still very noticeable. This is just the way it came out of the car and as you can see the deck hasn't even been cleaned up. I have the lifters in a lifter box and in order. I'm in Spokane, WA. but I've shipped engines from here to FL. NY. TX and other locations.
Thanks Mike

 

[m233roller]

WoW !!
I can't believe this hasn't been snatched up ??

 

[ZNix]

Wish I had the cash right now.. I would snatch this up in a heartbeat.

 

[2toneNV]

Good price, but whose girdle is it? I would consider it but don't need the cam, flywheel or pan.

Posted from the TurboBuick.Com mobile app

 

[1NASTYGN]

Just bought a stroker kit. RJC OIL PAN for sale?

 

[TurboTom72]

Mike, what would your guess be for shipping to CT. 06712? I'm interested, but scared to see what shipping cost is going to be.

Tom

 

[dynoman]

I bought a 109 long block from Mike last December and shipping was $345 to Rochester NY.....Also Mike is great to deal with !!

 

[Undercover87T]

May be interested. Waiting on word on condition of my current motor. Will know tomorrow or sat.

 

[m233roller]

2toneNV, says right in my ad RJC girdle and may I ask why you wouldn't want the flywheel ? You going to re balance or ?

 

[m233roller]

Dave, Here's the only RJC pan I have for sale. ?? In fact I'll give it away. Hee--Hee

 

[2toneNV]

Knew I should have paid more attention on the info in the post. I was at a trade show when I saw this ad and was distracted.

Posted from the TurboBuick.Com mobile app

 

[RIDDICK]

Wow!!!! this is a great price for this Engine, you can probably go down Mid 10 second to High 10 second easily with this Engine.
GLWS Mike.

 

[1NASTYGN]

TTT. GLWS