You can type here any text you want

Cam Sensor

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

19aD6Gn

dust_d_boy
Joined
Dec 26, 2008
Messages
36
Does anyone know if i need a special tool to take the cam sensor off, i need to know please. Thank you
 
No, the cap has two philip (sp) head screws, the unit is held in by a 9/16 or 14mm bolt.
 
if its just the cap a phillips , sometimes you have to unplug the coolant temp sender , sometimes its in there wrong and you have to rotate the sensor body

i use an old school matco distibutor wrench for the hold down bolt since thats really what it is ..
like this one

eBay Motors: Matco Distributor Wrench 9/16 (item 190287146303 end time Mar-16-09 17:36:57 PDT)

if you have to remove the cam sensor body or spin it youll also want to read this link on how to install and adjust a cam sensor
http://www.vortexbuicks-etc.com/cam sensor.htm

and the caspers cam sensor tool makes things easier but a volt meter will work as well
 
Back
Top