Camshaft gear bolt torque rating?

[Joe 1320]

I have an ATR billet roller and was wondering what the cam sensor/oil pump drive gear retaining bolt should be torqued to? I've never used a torque wrench on it but due to the load, I suppose it should have some suggested torque value. Anyone know?

 

[Lee Thompson]

torque

I used 50 ft. lbs. with blue (242) loctite

 

[S10xGN]

Dave Weber did my nose setup and he recommended 75 ft/lbs and loctite *if* you desire (I used the red). I thought for sure the bolt wouldn't hold that much, but it did - several times, too!

HTH,

 

[Joe 1320]

Thanks guys!