car wont fire after mods.......

[TTAfreak]

ok, here are the 3 things I have done to the car.

installed Razors alky kit (this shouldnt have anything to do with car not starting)

installed turbo tweak chip.

installed 50# injectors.

I have checked all fuses. It appears that there is no fire getting to my plugs.
I do have fuel presure and have no leaks. all injectors are connected.
car turns over but does not fire.
when I pull a plug wire off while car is turning over, there does not appear to be any spark at all. could my coil have a problem?

 

[Swede2]

Change to another chip and see if it starts. The chip pins can be bent. So my thoughts go to the chip.

Daniel

 

[TT/Ameasap]

Remember....one mod at a time. Could be a few different things. Chip,coil pack,connections to name a couple.

 

[TTAfreak]

the following has been eliminated.

coil
ignition module
chip (I changed back to the stock chip and car still wouldnt fire)

from what I can tell im not getting any fire to the plugs.

im freaking BAFFLED.

 

[TTAfreak]

PROBLEM SOLVED!!!!!!!!!!!

I may be the only person to ever encounter this problem. when you hook up Julios (Razors) kit, do not, and I repeat DO NOT UNDER ANY CIRCUMSTANCES use the "INJ1" port on the fuse panel for the switched power source.

somehow the pac controller and the vehicles injectors were not liking that and the car would not fire.

 

[JOHNDEEREGN]

Glad you found it freak,,,,enjoy

 

[TTAfreak]

Originally posted by JOHNDEEREGN
Glad you found it freak,,,,enjoy

thanks man.

everything seems to be working perfectly. absolutely no knock at all.

my O2s are in the 850 range though. isnt that a bit rich? how can I lower them? just lower fuel presure some?

thanks again for everyones help and replies.