CARR rod bolts torque specs

[STP]

What should CARR rod bolts be torqued to using 10w30 oil? Need to know before I pop a cap off...Can't find any info on CARR online...Also what should ARP main studs and bolts be torqued to using 10w30?

 

[turbodave231]

Carillo won't give you a torque spec. They recommend measuring bolt stretch instead. If you measure one rod to the proper stretch using a torque wrench, then you can use that torque on the other rod bolts.

The following is right off their website

http://www.carrilloind.com/install.html

TYPE OF BOLT
THREAD SIZE STRETCH
RECOMMENED TORQUE
NOT TO EXCEED
1/4 SPS-CARR .004 to .006 275 Inch Pounds
5/16 SPS-WMC5 .004 to .006 38 Foot Pounds
5/16 SPS-CARR .005 to .007 45 Foot Pounds
3/8 SPS-WMC6 .005 to .007 45 Foot Pounds
3/8 SPS-CARR .005 to .007 65 Foot Pounds
7/16 SPS-CARR .005 to .008 100 Foot Pounds
7/16 SPS-WMC7 .005 to .007 75 Foot Pounds
7/16 SPS-WMC7-1 .005 to .007 75 Foot Pounds
DO NOT MAGNAFLUX CARRILLO CONNECTING RODS WITH BOLTS INSTALLED

Dave

 

[STP]

Thx Dave, I found that on Carrillo's website not long after I posted this...