Cas stock location IC . Any pics of one bolted on the car?

[GBGN1]

Missing the spacer from the passager side aluminum bracket and just want a heads up. I'll have to figure something out.
Thanks

 

[earlbrown]

There isn't a spacer. The bracket goes against that special bolt, then a nut, then the plastic ALT conduit bracket.

 

[V6POWER]

 

[GBGN1]

Thankyou .

 

[GBGN1]

There isn't a spacer. The bracket goes against that special bolt, then a nut, then the plastic ALT conduit bracket.

What about the bottom bolt on that bracket to engine?

 

[GBGN1]

There isn't a spacer. The bracket goes against that special bolt, then a nut, then the plastic ALT conduit bracket.

Ok I'll look

 

[GBGN1]

There isn't a spacer. The bracket goes against that special bolt, then a nut, then the plastic ALT conduit bracket.

 

[GBGN1]

So there's no spacer for the bottom stud. Has to be

 

[Grumpy]

So there's no spacer for the bottom stud. Has to be

YES there is a spacer on the top bolt going to the water pump!!! As a matter of fact CAS gave you a longer bolt all g with the spacer !

 

[earlbrown]

Oops. I missed the part about it being a DeQuick unit.

That's going to take some fabbing. You might be able to find something to use if you have a real hardware store local to you.

 

[GBGN1]

Yes earl that's what I had to do. Longer bolt and steel spacers. It will work. There not making these parts no more!

 

[BOP Nutt]

Username KIP sells brackets for the CAS V4 SLIC

 

[GBGN1]

Thanks, I ended up getting some steel spacers and it worked out good. Thanks