Catch can

[Loswages05]

Does any one use a catch can ? I see some oil coming from my breather of the val cover and I did see lill in my air filter to my maff pipe bad pvc? Thx

 

[Jay J]

Do a search--you will find what you are looking for in a recent thread.

 

[klmnla]

Moroso makes one with a breather filter on top for the driver side, and a smaller air-oil separator for the passenger, or PCV side. I have both.

 

[Loswages05]

Do you have a part # so I can check it out. Thx

 

[klmnla]

Moroso 85474 Universal Air/Oil Separator for the PCV. Im not sure what part number for the one on the breather side. Photos attached.

 

[wiseman]

I just installed one last week. I was having a lot of issues with oil getting into my throttle body also. It was starting to stain my new hood insulator so I installed one along with a rjc pcv. I haven't tested it out yet due to the weather being so cold and wet around here lately.

Posted from the TurboBuick.Com mobile app

 

[Loswages05]

So basically it's a PVC into the valve cover from there into Catch can

 

[wiseman]

Yes, you can install it like that and it should be fine, but I installed a new ac delco pcv and put it into its stock pcv location. I placed the rjc pcv inline with the stock pcv, "but" between the catch can and throttle body. This is to prevent the catch can from pressurizing.

I have a thread going that I need update. Do a search for catch cans on the forum and it should pop up. I finished my install, but need to post pictures of the results and blm numbers. Let me know if you can't find it with the info I posted and questions that have been answered so far. I got a lot of help from the guys here on the forum.

Posted from the TurboBuick.Com mobile app