Cleaning out the garage-lots of stuff!

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

TR Custom Parts

Mark Hueffman - Owner
Joined
May 25, 2001
Messages
12,737
Just cleaning some stuff out of the garage. All in good shape, some things are new. Paypal preferred. Will need your zip for actual shipping costs. All correspondence should be done on this thread NOT thru PM's. All prices are PLUS shipping.

Genuine Alkycontrol tank like new! Went to a trunk mounted cell so not needed any more. $90

Coolant overflow tank with a low level sensor installed. I used this for my old Do it yourself alky kit. $25

Windshield washer tank $10

Crank pulley off my GN LOW miles $35

Power Steering pulley of my GN LOW miles $15

10" electric fan barely used during an experiment on a SLIC $15

Wastegate solenoids, one fairly new, other was original off my GN, had both on the car hooked up in tandem when I ran them with a Boost Commander. One of them was altered to run along the other so they both pointed in the same direction. Unaltered one $35 Altered one $20

Y harness to run two wastegate solenoids in tandem $20

New satin finish master cylinder cover with Power 6 logo engraved for VACUUM brakes MC $30

Reddish Power 6 shifter knob new with adapter $45

Silver anodized shifter knob with adapter $40

Hood hinges took off my GN low miles, went with chrome ones! $50 pair

Fender to rad support braces took off my GN low miles, went with chrome! $20 pair

Stock intercooler pass side bracket $35

4 blue 3" x 3" silicone hoses ALL FOUR for $15

Trans line bracket bolts to oil pan $10

Trans line shield $10

Stock trans mount $20

Have 3 chrome 2.5" 90 degree elbows, could be used for up pipes if you have long enough hoses. NEW $40 each!

Chrome EGR valve cover $15

Chrome EGR solenoid cover $15

Chrome bracket that goes behind turbo $10 one side is painted black

2 bar MAP sensor off my GN low miles $15

VARIOUS PIPES FROM SOME STILLBORN PROJECTS!

3" plain aluminum 45 degree pipes $10 each

3.5" plain aluminum 45 degree pipes $10 each

3.5" black powder coated 45 degree pipes $15 each

3.5" silver powder coated 45 degree pipes $15 each

ONE 3.5" polished aluminum 45 degree pipe $25

3.5" chrome steel 45 degree pipes $25 each

3.5 90 degree rubber elbows $10 each
 

Attachments

  • 21310parts 001.jpg
    21310parts 001.jpg
    38 KB · Views: 710
  • 21310parts 002.jpg
    21310parts 002.jpg
    40.7 KB · Views: 717
  • 21310parts 003.jpg
    21310parts 003.jpg
    82.8 KB · Views: 719
  • 21310parts 004.jpg
    21310parts 004.jpg
    37.6 KB · Views: 711
  • 21310parts 005.jpg
    21310parts 005.jpg
    49.7 KB · Views: 716
Pipes listed could be used for a smaller cold air kit than what we offer.
 

Attachments

  • 21310parts 006.jpg
    21310parts 006.jpg
    44.6 KB · Views: 705
  • 21310parts 007.jpg
    21310parts 007.jpg
    45.2 KB · Views: 704
  • 21310parts 008.jpg
    21310parts 008.jpg
    46.5 KB · Views: 707
  • 21310parts 009.jpg
    21310parts 009.jpg
    96.1 KB · Views: 704
  • 21310parts 010.jpg
    21310parts 010.jpg
    44.7 KB · Views: 704
Last of the pics
 

Attachments

  • 21310parts 011.jpg
    21310parts 011.jpg
    39.8 KB · Views: 703
  • 21310parts 012.jpg
    21310parts 012.jpg
    37.9 KB · Views: 705
  • 21310parts 013.jpg
    21310parts 013.jpg
    42.4 KB · Views: 698
I'll take one of the 3" plain aluminum 45 deg. pipes.

zip 21784

thanks,
Scott
 
I'll take the red shift knob. This is complete with all mounting hardware? My zip code is 11432. Please PM me your paypal info.

Thanks
 
Back
Top