clocking a TA33

[tpivette89]

i bought a slightly used (5000 mile) Limit Engineering TA33 turbo from a forum member. however, the previous owner had an intercooled setup, and the outlet spout of the turbo has been angled differently from the stock position. what do i need to do to rotate it back to the stock location? thanks in advance

 

[cool 84]

Loosen the 1/2" bolts around the compressor housing just enough to rotate the housing. It's not necessary to take the bolts or compressor housing off and it likens the chance of damaging the compressor wheel. You'll probably have to pull the wastegate off and move it into the correct position. Just keep a couple bolts snug when you do it.