Code 44 after Alky install!!
- Thread starter RUQWKNF27
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
vacuum 6
Well-Known Member
- Joined
- Jan 6, 2006
- Messages
- 2,412
CODE 44
Trouble Code 44 indicates that the O2 sensor is showing a persistently high exhaust oxygen content (lean), despite the efforts of the ECM to increase injector on-time (thus increasing fuel delivered). Integrator and BLM numbers may indicate > 128 by a substantial margin.
The conditions for setting this code are:
no Code 33 or Code 34 (MAF Error) present, and
the O2 sensor voltage remains below 250 mVolts, and
the ECM is in Closed Loop control, and
the above conditions exist for more than 50 seconds.
Typical causes for this code include:
1) O2 sensor defective or lead shorted
2) Lean injectors (dirty or blocked)
3) Water in fuel
4) Exhaust leaks upstream of O2 sensor
5) Fuel pressure or volume too low
6) MAF sensor reading lower airflow than is actually present
7) Vacuum leaks
8) Incorrect or poorly calibrated PROM
Trouble Code 44 indicates that the O2 sensor is showing a persistently high exhaust oxygen content (lean), despite the efforts of the ECM to increase injector on-time (thus increasing fuel delivered). Integrator and BLM numbers may indicate > 128 by a substantial margin.
The conditions for setting this code are:
no Code 33 or Code 34 (MAF Error) present, and
the O2 sensor voltage remains below 250 mVolts, and
the ECM is in Closed Loop control, and
the above conditions exist for more than 50 seconds.
Typical causes for this code include:
1) O2 sensor defective or lead shorted
2) Lean injectors (dirty or blocked)
3) Water in fuel
4) Exhaust leaks upstream of O2 sensor
5) Fuel pressure or volume too low
6) MAF sensor reading lower airflow than is actually present
7) Vacuum leaks
8) Incorrect or poorly calibrated PROM
Ok seems you may have seen this happen before . COOL
Can these still be had @ the dealerships?
Just called list $52.00 said $39.00 out the door.
I may just hook my heated sensor back up for $00.00
I got like 20 brand new 1 wire oxygen sensors a guy gave me like 3 yrs ago. Is it to say any 1 wire sensor will work on our cars? Threads are the same and all. I can get #'s of them and pic!
Can these still be had @ the dealerships?
Just called list $52.00 said $39.00 out the door.
I may just hook my heated sensor back up for $00.00
I got like 20 brand new 1 wire oxygen sensors a guy gave me like 3 yrs ago. Is it to say any 1 wire sensor will work on our cars? Threads are the same and all. I can get #'s of them and pic!
