Comp 868, Stage 2 valve covers, balancer, Carrillo rods, oil pan!

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Squid4life

Well-Known Member
Joined
Jul 5, 2004
Messages
6,275
Well, I have some parts to get rid of that came in a lot of other stuff:

(1) 1 single Comp Cams 868 roller lifter, new in pkg - $15
(2) Blue Stage 2 valve covers - $85
(3) Black Stage 2 valve covers, have valve spring squirters! - $115
(4) Fluidampr balancer for Stage 2, dyno time only - $150
(5) Steel Stage 2 dry sump oil pan. 2 pickups, windage screen, 1 drain. The screen has dirty surface rust but will clean up nice. - $125
(6) Carrillo on center wide journal rods 6.500" long. Dyno time to check pressure and operation then sat as a spare. - $350
(7) Carter mechanical fuel pump, with fittings. Same dyno time only. - $50
(8) Brand new Wiseco Stage 2 NA pistons. With 4/6 pins, all locks. - $135
(9) Dyno time Wiseco Stage 2 NA pistons, still have coatings on skirts. (with pins) - $85

Or best offer, or trade for ??? I could use a dry sump pump and parts, shorter on center wide rods (closer to 6"), roller cam, 90mm throttle body, 120-160 injectors, 4 bolt turbo, oil accumulator, etc, etc, etc... :biggrin: Surprise me. ;)
 

Attachments

  • DSC01210.jpg
    DSC01210.jpg
    73.5 KB · Views: 702
  • DSC01145.jpg
    DSC01145.jpg
    64.8 KB · Views: 706
  • DSC01147.jpg
    DSC01147.jpg
    69.6 KB · Views: 705
  • DSC01216.jpg
    DSC01216.jpg
    79.7 KB · Views: 706
  • DSC01217.jpg
    DSC01217.jpg
    59.5 KB · Views: 705
more
 

Attachments

  • DSC01212.jpg
    DSC01212.jpg
    66 KB · Views: 695
  • DSC01228.jpg
    DSC01228.jpg
    107.8 KB · Views: 694
  • DSC01229.jpg
    DSC01229.jpg
    92.2 KB · Views: 691
  • DSC01224.jpg
    DSC01224.jpg
    54.2 KB · Views: 685
  • DSC01227.jpg
    DSC01227.jpg
    51.9 KB · Views: 685
more...
 

Attachments

  • DSC01214.jpg
    DSC01214.jpg
    89.7 KB · Views: 680
  • DSC01143.jpg
    DSC01143.jpg
    44.3 KB · Views: 680
  • DSC01142.jpg
    DSC01142.jpg
    58.5 KB · Views: 678
  • DSC01138.jpg
    DSC01138.jpg
    69.8 KB · Views: 678
  • DSC01139.jpg
    DSC01139.jpg
    43.2 KB · Views: 678
more pics as requested
 

Attachments

  • DSC01231.jpg
    DSC01231.jpg
    57.8 KB · Views: 661
  • DSC01232.jpg
    DSC01232.jpg
    70.9 KB · Views: 659
Stage II Valve covers

I am beginning to look into building a Stage II and I am curious.

Do stage II engines necessitate the removal of A/C and the A/C box?
 
Thanks Neal! Much appreciated!

Mad, check out the thread below, it has some info on the heater/AC box. From everything I have seen, say goodbye to AC, and it is even super tight with just the heater core in there. I will more than likely put a heater/AC delete plate in there and put a small heater behind the heater plate under the dash. I like the idea of having room to work under the hood.

http://www.turbobuick.com/forums/st...ible-reproduction-headers-stage-ii-heads.html
 
UPDATED PRICES, NEED THIS STUFF GONE!

(1) 1 single Comp Cams 868 roller lifter, new in pkg - $10 SHIPPED
(2) Blue Stage 2 valve covers - $50
(3) Black Stage 2 valve covers, have valve spring squirters! - $85
(5) Steel Stage 2 dry sump oil pan. 2 pickups, windage screen, 1 drain. The screen has dirty surface rust but will clean up nice. - $100
(7) Carter mechanical fuel pump, with fittings. Same dyno time only. - $20
(8) Brand new Wiseco Stage 2 NA pistons. With 4/6 pins, all locks. - $90
 
Is that shipped James?:biggrin: It should work on my 83 T type, right?:confused:

For you Charlie, you bet. All yours. I would imagine it would work fine, but would suggest a regulator. I have a carter mech on my 70 Torino small block and it needs a simple regulator, holley I think I have. Carters can push some PSI!
 
For you Charlie, you bet. All yours. I would imagine it would work fine, but would suggest a regulator. I have a carter mech on my 70 Torino small block and it needs a simple regulator, holley I think I have. Carters can push some PSI!

Done bud.:biggrin: Send me payment info so I can take care of this.:cool: Been working on the frame and need to post some updates but I don't think most of the guys will understand what I'm doing to her.:eek:
 
UPDATED PRICES, NEED THIS STUFF GONE!

(1) 1 single Comp Cams 868 roller lifter, new in pkg - $10 SHIPPED
(2) Black Stage 2 valve covers, have valve spring squirters! - $65
(3) Steel Stage 2 dry sump oil pan. 2 pickups, windage screen, 1 drain. The screen has dirty surface rust but will clean up nice. - $85
(4) Brand new Wiseco Stage 2 NA pistons. With 4/6 pins, all locks. - $80

Also, will part with a spare BMS Stage II front cover. Super clean inside, looks new. Has restricted oil fitting above chain/gear drive area to keep cool and lubricated. Comes with good seal and seal retainer, timing pointer, etc. $95 plus shipping.

Make offers if you don't like the prices. A few things I would consider trades for:

Stainless xover for stock headers
GTA/GNX style center caps
Alum bumper shock/supports
Scanmaster hood
Surprise me...
:biggrin:
 

Attachments

  • DSC01233.jpg
    DSC01233.jpg
    61 KB · Views: 270
  • DSC01234.jpg
    DSC01234.jpg
    52.9 KB · Views: 268
Are the bumper supports the ones that goes between the bumper and the body James? I've got rears but not the fronts yet.
 
I think we are talking about the same thing. Here is a pic, courtesy of Kirbans:
 

Attachments

  • bumper support.jpg
    bumper support.jpg
    82.4 KB · Views: 263
By the way, got the $ like the next day for the pump, thanks brother! Let me know when it gets there. I think the wife might have went cheap and sent it slow boat...
 
I think we are talking about the same thing. Here is a pic, courtesy of Kirbans:

We are James. Are you willing to seperate them? I just need the fronts.:confused:

By the way, got the $ like the next day for the pump, thanks brother! Let me know when it gets there. I think the wife might have went cheap and sent it slow boat...

My guess is you're right on the slow boat.:biggrin: I'll tell you when it gets here James. Thanks again.:cool:
 
Are the bumper supports the ones that goes between the bumper and the body James? I've got rears but not the fronts yet.

I just realized something... Us guys from the midwest sometimes don't understand each other too well... I meant I would consider trading some of the parts listed above for the parts listed below. I NEED the bumper brackets, and would trade some of my junk for them. :biggrin:

Sorry for the confusion Charlie!
 
Back
Top