Complete Rear 3.42 Moser axles and Girdle with H&R uppers and lowers

[LS powered GN]

Very low miles on this complete setup!! The rear has 28 spline Moser with a Eaton center section.. Also has Moser girdle with aluminum drums.. All lines are still on it.. The rear comes with H&R upper and lowers. There was a previous posting with no pics.. The Wolfe bar is gone. 1500.00

 

[Starz]

Where is this located?

Depending on location. Please put me first in line.

 

[LS powered GN]

Located in Connecticut

 

[psycho6cyl]

If you decide to split it up I would be interested in upper and lower arms. Are they for stock length? Or custom arm for pinion angle? Thx Jeff

 

[LS powered GN]

I would like to get rid of it as a package.. The lowers are 1/4 inch custom length, add 1.5 degree pinion

 

[Starz]

That would be to far for me to drive. Take me out of the running.

 

[turbo6mike]

I would be interested in rear end with out control arms. How much?????

 

[psycho6cyl]

Ill pass on control arm looking for stock length..

 

[LS powered GN]

1200 without control arms

 

[LS powered GN]

TTT

 

[LS powered GN]

I will separate!! 1150.00 for the rear....250.00 for the bars

 

[LS powered GN]

1050.00 for the rear 250.00 for the bars

 

[hungerbuhler1]

Does this need anything? Or just slap in and go?

 

[LS powered GN]

It is all there, just slap it in and bleed the brakes and its ready to go..

 

[mzunino]

Those upper & lowers are non adjustable?


Posted from the TurboBuick.Com mobile app

 

[LS powered GN]

non adjustable.. The lowers are 1/4 inch custom length, it adds 1.5 degree pinion angle

 

[LS powered GN]

SOLD