Coolant fittings

[SS/GN]

Looking for sizes or part numbers for the intake coolant fittings. The one that has a tapered end going to the steel line and the one in the front that goes to the water pump S hose. Thanks in advance

 

[earlbrown]

1/2NPT. The hard pipe has a JIC end and the S-hose uses a barb.

 

[mtocrs1]

Pretty sure the one that connects the hard pipe is 1/2npt to -10an


Sent from my iPhone using Tapatalk

 

[bison]

Pretty sure the one that connects the hard pipe is 1/2npt to -10an


Sent from my iPhone using Tapatalk

It is. They are usually common stock at any place that makes hose assemblies


Sent from my iPhone using Tapatalk

 

[SS/GN]

By pass is 3/8 NPT to 5/8 Hose end
Steel line is 1/2 NPT to - 10

Thanks guys and I will post part numbers when I receive for future reference. I know vendors sell them, however shipping will cost me more than the parts. I ordered them from my local Napa

Appreciate the input

 

[earlbrown]

It's actually a JIC fitting but -10 will work. There's just a few degrees difference on the sealing bevel.

 

[SS/GN]

Thanks for the info guys. Here is what I purchased and the part numbers for future reference.